PRSpoggers Posted November 22, 2020 Report Share Posted November 22, 2020 I have NEVER seen anything but maple, ebony, rosewood, purple heart and pau ferro for a fingerboard. Luthier's who actually build, why don't you use them? Quote Link to comment Share on other sites More sharing options...
curtisa Posted November 22, 2020 Report Share Posted November 22, 2020 Buckeye burl is too soft and fragile to be used as a fretboard. It won't withstand the wear of being exposed to guitar strings and fingers, nor will it retain the frets once they're installed. Pretty sure cocobolo is used regularly as a fretboard, but its rarity makes it much less commonly seen. Bocote is another related timber that makes for another exotic fretboard option. There's far more options out there for fretboards than just the five you list. You're not looking hard enough. A lot of Australian desert hardwoods make good fretboards - Jarrah, Gidgee, Cooktown Ironwood, River Oak. I used a piece of Merbau decking as a fretboard once that worked quite well. Strictly speaking, any timber that has a high stiffness and hardness, and good stability once dried and cut should work as a fretboard. Maple, ebony and rosewood just get the spotlight more due to their plentiful supply (or at least before widespread over-logging started endangering supply) and the expectations of customers and manufacturers that 'traditional' timbers be used in guitar construction. 1 Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted November 22, 2020 Report Share Posted November 22, 2020 If you've NEVER seen anything else been used for fingerboards, you haven't seen much. Even on this site there's numerous examples of other woods. For example I've used Merbau for my last builds. Cocobolo is a common wood for fretboards as well as Ziricote, Chechen, Eucalyptus, Granadillo, Padouk, Wenge, Ovangkol, Walnut, Indian Laurel, Bloodwood, Bocote, Leopardwood, Zebrawood plus of course your list - available at Stewmac, Madinter or Exotic Wood Zone among others. The reason why Buckeye Burl isn't used for fretboard is its softness. A fretboard has to withstand the wear of metal strings, fingernails and dirty fingers. The following lists woods from soft to hard, that might help in deciding whether a piece of wood could be used as a fingerboard or not: https://www.bestbassgear.com/ebass/ideas/wood-hardness-chart-bigger-better-more-woods.html @curtisa you beat me in typing speed 1 Quote Link to comment Share on other sites More sharing options...
killemall8 Posted November 25, 2020 Report Share Posted November 25, 2020 If you look at my build thread in the in progress section, you can see probably 10 different fretboard woods from palemoon ebony, wenge, ziricote, paduak, and zebrawood 1 Quote Link to comment Share on other sites More sharing options...
Bjorn.LaSanche Posted September 6, 2021 Report Share Posted September 6, 2021 Cocobolo isn't used as much due I believe to it's oil content. It is a Rosewood though it doesn't take glue well, but Systemthree G-2 is a long work time epoxy that would get you around that if you're wanting to use this wood Quote Link to comment Share on other sites More sharing options...
Nicco Posted October 6, 2021 Report Share Posted October 6, 2021 On 11/22/2020 at 5:43 PM, curtisa said: Buckeye burl is too soft and fragile to be used as a fretboard. It won't withstand the wear of being exposed to guitar strings and fingers, nor will it retain the frets once they're installed. Pretty sure cocobolo is used regularly as a fretboard, but its rarity makes it much less commonly seen. Bocote is another related timber that makes for another exotic fretboard option. There's far more options out there for fretboards than just the five you list. You're not looking hard enough. A lot of Australian desert hardwoods make good fretboards - Jarrah, Gidgee, Cooktown Ironwood, River Oak. I used a piece of Merbau decking as a fretboard once that worked quite well. Strictly speaking, any timber that has a high stiffness and hardness, and good stability once dried and cut should work as a fretboard. Maple, ebony and rosewood just get the spotlight more due to their plentiful supply (or at least before widespread over-logging started endangering supply) and the expectations of customers and manufacturers that 'traditional' timbers be used in guitar construction. Hey guys, sorry to dig up an old post, but Curtisa, I'd be interested to hear your thoughts on Marri, if you have an opinion at all? It's quite similar to jarrah in terms of working with, but I've not seen anyone who's used it? I've got a nice piece at home that would be suitable, I'm considering having a crack at it. Not sure what it's actual hardness would be though relative to jarrah Quote Link to comment Share on other sites More sharing options...
curtisa Posted October 6, 2021 Report Share Posted October 6, 2021 I've never used Marri. Have you tried searching for some of its properties? Google suggests that Marri has a Janka hardness of 7-8kN. Not as hard as Jarrah but harder than maple, so on face value it looks like it would work OK. But that's not the only property to look for. You want dimensional stability, straight grain, good crush strength (for holding on to theose fret tangs), free of gum veins or anything that might weaken it etc. Maybe start somewhere like a wood database and compare the properties of Marri with the other well-known fretboard timbers and see where it fits in. There might also be other foibles to consider, such as whether the wood has extremely open pores (which might capture all manner of finger crud and look ugly very quickly) or whether it has any special requirements for gluing (maybe it has a high natural oil content and won't adhever to standard PVA?). Quote Link to comment Share on other sites More sharing options...
Nicco Posted October 6, 2021 Report Share Posted October 6, 2021 Thanks Curtis. I'll have a good look into it before I try it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.