Bizman62 Posted May 17, 2020 Report Share Posted May 17, 2020 Do you think this might become a body or two during the next decade? There's some spalting to be seen, hopefully it's not too rotten! There's a couple of the same diameter, though, so a few rough planks will be sawn during the summer. 1 1 Quote Link to comment Share on other sites More sharing options...
10pizza Posted May 17, 2020 Report Share Posted May 17, 2020 now that would be nice! How are you going to saw that piece into planks? Quote Link to comment Share on other sites More sharing options...
curtisa Posted May 17, 2020 Report Share Posted May 17, 2020 Is it just me or does that tree trunk look like a pair of legs and a butt? 1 3 Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted May 17, 2020 Author Report Share Posted May 17, 2020 1 hour ago, 10pizza said: How are you going to saw that piece into planks? Hopefully not with the chainsaw like I did with the poplar! A customer told that he's got a big bandsaw, I hope he's still willing to saw my wood. If not, I guess I'd better reshape the teeth of the chain to 0-5 deg. Or even nip off two of every three teeth off the chain which I've heard would cut better along the grain. The latter can't be confirmed by Google so I guess the former would be the safer option. @curtisa, do you think you should mention that to your shrink? 1 Quote Link to comment Share on other sites More sharing options...
JGTay Posted May 17, 2020 Report Share Posted May 17, 2020 1 hour ago, Bizman62 said: A customer told that he's got a big bandsaw, I hope he's still willing to saw my wood Ouch... 1 Quote Link to comment Share on other sites More sharing options...
10pizza Posted May 17, 2020 Report Share Posted May 17, 2020 9 hours ago, curtisa said: Is it just me or does that tree trunk look like a pair of legs and a butt? you shouldn't have written down this, now I can't see anything else in it! 1 Quote Link to comment Share on other sites More sharing options...
curtisa Posted May 17, 2020 Report Share Posted May 17, 2020 12 hours ago, Bizman62 said: do you think you should mention that to your shrink? Only if he wants to lock me up, which he can't do anyway 'cause we're all already locked up. Anyway, didn't anybody tell you? I'm a teapot! Nurse! Nurse! He's at it again! 4 hours ago, 10pizza said: you shouldn't have written down this, now I can't see anything else in it! Hmmmm...maybe it's not just me after all... 2 Quote Link to comment Share on other sites More sharing options...
MiKro Posted May 18, 2020 Report Share Posted May 18, 2020 Not sure what that wood is, but the color of it being cut fresh would indicate bois'darc in Texas and that stuff is the devil to cut with anything. The mineral content makes sparks fly with a chain saw. LOL Mk Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted May 18, 2020 Author Report Share Posted May 18, 2020 6 hours ago, MiKro said: Not sure what that wood is, but the color of it being cut fresh would indicate bois'darc in Texas and that stuff is the devil to cut with anything. The mineral content makes sparks fly with a chain saw. LOL Oh, I should have mentioned it! It's alder (Alnus incana) and having cut several thousand trunks into 35 cm blocks I can tell that it's very nice to cut - unlike goat willow (Salix caprea) which eats the chain alive and keeps sparkling even in the oven. It's noticably softer than birch but denser than aspen (Populus tremula), has a uniform grain which makes it easy to carve and rots easily which makes finding thick enough guitar body wood a bit challenging. The roasted 18x4 cm planks I've built a couple guitars of have all been slab sawn telling that the trunks haven't been too thick to start with. Because of its softness it's often looked down on as crapwood, yet it has many positive features: it burns with a clean flame without sooting the chimney flue, it gives a nice gentle flavour for smoking and it isn't poisonous or add a bitter taste as spoons or pails. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post JayT Posted May 19, 2020 Popular Post Report Share Posted May 19, 2020 You're not kidding about an early stage! But my next build is at an even earlier stage: 7 Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted May 19, 2020 Author Report Share Posted May 19, 2020 By leaves I'd call that a birch but as you're on the other side of the pond it may be something else. Quote Link to comment Share on other sites More sharing options...
Workingman Posted May 20, 2020 Report Share Posted May 20, 2020 Have you considered splitting it into quarters and then sawing it? Should be easier. Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted May 20, 2020 Author Report Share Posted May 20, 2020 I don't have the tools for splitting it. My axes are very good for chopping firewood but a trunk with twisted grain like that might be too much. After having seen how straight the poplar was that could have been doable with my axes and wedges, though. Quote Link to comment Share on other sites More sharing options...
mistermikev Posted May 21, 2020 Report Share Posted May 21, 2020 "guitar kit - some assembly required." it's hard to envision what that wood looks like with all the bark on it and such... but I'm confident you'll make it into something lovely. looking fwd to it. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted May 21, 2020 Report Share Posted May 21, 2020 Once it's cut, @Bizman62 , how long does it need seasoning? It will be interesting watching something emerge from a full tree-trunk. Quote Link to comment Share on other sites More sharing options...
curtisa Posted May 21, 2020 Report Share Posted May 21, 2020 Ditto. My one and only attempt at milling my own tree into timber slabs resulted in a bunch of planks that split and checked like crazy. Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted May 21, 2020 Author Report Share Posted May 21, 2020 7 hours ago, Andyjr1515 said: how long does it need seasoning? I had the poplar in my shed for some five years, then I cut the rough planks into bookmatched boards which I piled in the balcony of the class, indoors that is, and pretty warm up at 4 metres as heat goes up and it's normal room temperature on the floor level. @curtisa I'm planning to apply some paint at the ends to prevent checking. The harder trunk already has small cracks at the end so I'd better hurry with that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.