Stewey Posted April 17, 2010 Report Share Posted April 17, 2010 I've been progressing along with this one. I kept forgetting to take photos though so I didn't bother to update the thread, I know how much you guys like photos. Grain filled, primed and painted: Today I scraped back the binding, you can also see the electronics cavity here, I got a bit creative with the routing in the places where I want to mount the active electronics and the battery: I'll finish flattening the colour coat tomorrow and then lay on the clear. Leave it for the week to dry and hopefully buff it out next weekend. Quote Link to comment Share on other sites More sharing options...
avengers63 Posted April 17, 2010 Report Share Posted April 17, 2010 I love Rickenbackers. You need to find some tape-wound strings to complete the package. Quote Link to comment Share on other sites More sharing options...
Juntunen Guitars Posted April 17, 2010 Report Share Posted April 17, 2010 I am liking this build. I really like these basses they are balanced very good and look awesome especially this one, I like the black binding on the white finish. Quote Link to comment Share on other sites More sharing options...
Muzz Posted April 17, 2010 Report Share Posted April 17, 2010 Looking great, I like the control cavity set out, how did you go with the three way switch? Quote Link to comment Share on other sites More sharing options...
Stewey Posted April 17, 2010 Author Report Share Posted April 17, 2010 Yes, good point on the tape wounds. I've never used them before, any recommendations on brand? The three way fits nice. It is the deepest cavity up near the bridge pup. I had 7mm of wood to spare behind it. Perfect fit. Quote Link to comment Share on other sites More sharing options...
avengers63 Posted April 18, 2010 Report Share Posted April 18, 2010 Yes, good point on the tape wounds. I've never used them before, any recommendations on brand? I've never used them either, but it's a Ric bass - what else should you use? The first name that comes to mind is Rotosound. Quote Link to comment Share on other sites More sharing options...
Stewey Posted April 26, 2010 Author Report Share Posted April 26, 2010 Well I have ordered some Rotosounds, they should be here during the week. This weekend I got a few of the little bits done. Buffed out the clear coat, finished off the pickguards, got all the wiring together and installed most of the hardware. I still need to slot the nut, make the truss rod cover, install the strap buttons and give the frets a look at. If the strings turn up I can probably get this one finished next weekend. Quote Link to comment Share on other sites More sharing options...
avengers63 Posted April 26, 2010 Report Share Posted April 26, 2010 Can we get a closer shot of the bridge pup? It looks like diamondplate from this angle. Quote Link to comment Share on other sites More sharing options...
WezV Posted April 26, 2010 Report Share Posted April 26, 2010 that is rather tasty Quote Link to comment Share on other sites More sharing options...
Juntunen Guitars Posted April 26, 2010 Report Share Posted April 26, 2010 Very nice Quote Link to comment Share on other sites More sharing options...
low end fuzz Posted April 26, 2010 Report Share Posted April 26, 2010 if i may back pedal a bit here; i'm interested in the neck join; it appears like a set in design ala thru neck; that i understand; but did you clamp the edges and actually sqeeze the sides glued to the neck? cuz i like that!; seems like alot of extra work compared to just gluing a neck thru; but whats the thinking behind it? and am i even correct about what you did there Quote Link to comment Share on other sites More sharing options...
Stewey Posted April 27, 2010 Author Report Share Posted April 27, 2010 Yeah that is a bit of checker plate around the bridge pup. The original has that metal cover over the bridge pup so I put something shiny there to give it a similar feel. I'll have more pics on the weekend. Thanks guys, I am quite excited for how this one is turning out. low end fuzz, that is exactly what I did. It was a bit of effort making the joint line up below the bridge area, I just kept skimming it off a bit until both sides clamped onto the neck blank square. The reasoning behind it was that I can source 2nd class guitar length neck through blanks rather cheaply. I also can't see it making any difference to the tone. The bridge mounts right on the end of the blank so everything along the string path is mounted to the same piece of timber, just like a proper neck through. Quote Link to comment Share on other sites More sharing options...
Stewey Posted May 9, 2010 Author Report Share Posted May 9, 2010 So I finally got the strings in and finished this one up this weekend. You may be able to see the scratches I've already put in the bridge pup from my vigorous picking. Overall I'm quite happy with how she turned out. I'm a little disappointed with the first fret marker though, I only noticed it is off centre when I put the strings on, must have stuffed up the measuring, doh. Oh well, off to do some playing. Quote Link to comment Share on other sites More sharing options...
low end fuzz Posted May 9, 2010 Report Share Posted May 9, 2010 i hate rickenbakers; i cant beleive i like this one so much! Quote Link to comment Share on other sites More sharing options...
Prostheta Posted May 9, 2010 Report Share Posted May 9, 2010 Great work - reminds me in style of DougK's white Firebird. Sweet! I do have to say though - the diamondplate looks kludgey and changes the otherwise great balance. Quote Link to comment Share on other sites More sharing options...
Narcissism Posted May 10, 2010 Report Share Posted May 10, 2010 Niiiiiiiiice! I was looking forward to seeing this one completed! Quote Link to comment Share on other sites More sharing options...
Bassisgreat Posted May 10, 2010 Report Share Posted May 10, 2010 Excellent!!! Quote Link to comment Share on other sites More sharing options...
Stewey Posted May 10, 2010 Author Report Share Posted May 10, 2010 Thanks guys, I'm very happy with this one. Great work - reminds me in style of DougK's white Firebird. Sweet! I do have to say though - the diamondplate looks kludgey and changes the otherwise great balance. I know where you are coming from Prostheta. I am already looking to acquire something to replace it with. I think I'll give plain aluminium a go next, all polished up to a mirror finish. Do you reckon I should make the entire pickup surround out of al, or keep the black on chrome look, or just black? Quote Link to comment Share on other sites More sharing options...
Muzz Posted May 10, 2010 Report Share Posted May 10, 2010 Thanks guys, I'm very happy with this one. Great work - reminds me in style of DougK's white Firebird. Sweet! I do have to say though - the diamondplate looks kludgey and changes the otherwise great balance. I know where you are coming from Prostheta. I am already looking to acquire something to replace it with. I think I'll give plain aluminium a go next, all polished up to a mirror finish. Do you reckon I should make the entire pickup surround out of al, or keep the black on chrome look, or just black? Fantastic bass, high impact, sleek, yep the bridge pup would look at home in an all black collar Quote Link to comment Share on other sites More sharing options...
Prostheta Posted May 10, 2010 Report Share Posted May 10, 2010 A chromed piece of Aluminium might look sweet, and in keeping with the bridge finish. Introducing too many textures/finishes into a simple look makes odd items stand out? I love offset shapes and bold but simple designs - like this: http://www.dv247.com/guitars/ibanez-icb300...ar-white--60900 Quote Link to comment Share on other sites More sharing options...
Stewey Posted May 11, 2010 Author Report Share Posted May 11, 2010 Ok, I'm going to make up both and give them a test. Pics on the weekend Quote Link to comment Share on other sites More sharing options...
Geo Posted May 11, 2010 Report Share Posted May 11, 2010 Pure class with a little bling..... aww yyeeaaahhh!!! Great work. Quote Link to comment Share on other sites More sharing options...
Prostheta Posted March 27, 2011 Report Share Posted March 27, 2011 Old thread bump! Was this one ever decided on? Quote Link to comment Share on other sites More sharing options...
Stewey Posted March 28, 2011 Author Report Share Posted March 28, 2011 Wow, I forgot all about this one. I just received my first orders straight after this one was finished and promptly put it in my playing room. Thanks for reminding me to dig it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.