Lord-of-the-strings Posted April 8, 2006 Report Share Posted April 8, 2006 I would say dull, but that's kind of putting it lightly. It's like they're almost dented? I'd post a pic but I don't know how. So how do I go about fixing this (if at all possible)? Quote Link to comment Share on other sites More sharing options...
n8rofwyo Posted April 8, 2006 Report Share Posted April 8, 2006 Try this. Scary Sharp Method You need to remove any knicks in the blade before progressing to actually sharpening it. I generally use a stationary grinder to remove large knicks or chips in the blade, but it can be done with a little elbow grease and a sharpening stone. Nate Robinson. PS for more info do a forum search on scary sharp method. Quote Link to comment Share on other sites More sharing options...
soapbarstrat Posted April 8, 2006 Report Share Posted April 8, 2006 Quote Link to comment Share on other sites More sharing options...
Lord-of-the-strings Posted April 8, 2006 Author Report Share Posted April 8, 2006 Try this. Scary Sharp Method You need to remove any knicks in the blade before progressing to actually sharpening it. I generally use a stationary grinder to remove large knicks or chips in the blade, but it can be done with a little elbow grease and a sharpening stone. Nate Robinson. PS for more info do a forum search on scary sharp method. Wouldn't grinding them down make the shorter, thus change where the tremolo sits on the body? could this screw up intonation? Quote Link to comment Share on other sites More sharing options...
marksound Posted April 8, 2006 Report Share Posted April 8, 2006 Baaad Knife Edges Oh. Whoops. I thought it said Bread Knife Edges. Stupid bifocals. Quote Link to comment Share on other sites More sharing options...
Guitarfrenzy Posted April 8, 2006 Report Share Posted April 8, 2006 Try this. Scary Sharp Method You need to remove any knicks in the blade before progressing to actually sharpening it. I generally use a stationary grinder to remove large knicks or chips in the blade, but it can be done with a little elbow grease and a sharpening stone. Nate Robinson. PS for more info do a forum search on scary sharp method. Thanks for that link, now after reading this article I think instead of throwing away all those Gillette blades, I will reshapen them with sandpaper and use them again. LOL On a serious note, instead of explaining everything here, I'll just point you in the right direction. Tremolo base knife edge worn or burred at the pivot point - This is not common on Edge tremolos, but is very common on original Floyd Rose tremolos due to a defect in their design. Interestingly Ibanez improved upon a major flaw thus reducing this problem with the Edge. Fix - Further explanation later but briefly you need to file the knife edge smooth. You can use a thin fine metal file. Remove the tremolo and arm holder. File the knife edge by holding the file at a slight angle. File in one direction from the fine tuner side of the pivot point toward the front of the bridge. Repeat for the top and bottom of the right and left pivot point. -> This was taken from this jemsite link!! Quote Link to comment Share on other sites More sharing options...
Racer X Posted April 8, 2006 Report Share Posted April 8, 2006 Try this. Scary Sharp Method You need to remove any knicks in the blade before progressing to actually sharpening it. I generally use a stationary grinder to remove large knicks or chips in the blade, but it can be done with a little elbow grease and a sharpening stone. Nate Robinson. PS for more info do a forum search on scary sharp method. Wouldn't grinding them down make the shorter, thus change where the tremolo sits on the body? could this screw up intonation? Doubtful, since you can adjust each saddle, individually, to compensate for it. I mean, you don't want to get TOO crazy with it, though. Quote Link to comment Share on other sites More sharing options...
n8rofwyo Posted April 9, 2006 Report Share Posted April 9, 2006 Ha Ha!!!! I was under the impression we were speaking of planer knives. I guess in this instance a picture is worth a thousand words. Sorry for sending you in circles. Nate Robinson Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.