jay5 Posted March 26, 2005 Report Share Posted March 26, 2005 Someone on the MIMF posted this a while back. I havent done a neck angle so I cant confirm if the math is correct. You still need to know the important measurements related to neck angle but I thought this was pretty clever. Neck Angle Calc. Quote Link to comment Share on other sites More sharing options...
GregP Posted March 26, 2005 Report Share Posted March 26, 2005 Good one! Since nut height is almost always a wee bit adjustable, even if your measurements are off by a millimetre or two, this'll get you right into the ballpark. Probably better to either measure certain things a bit off (ie. say that your bridge is a smidgen taller than it really is) or just add a fraction of a degree to the final calculation. If your angle ends up that you need to raise the bridge action a bit, that's usually possible whereas lowering it is not. Greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.