Badams Posted February 27, 2005 Report Share Posted February 27, 2005 If you want guitars with superior tone and sustain not to mention shed about 4 lbs. then chamber the hell out of them.Just leave a strip about bridge width down the middle. You need to make a top and bottom so that you can router out chambers but once you do I bet you never make another one solid. You make alot of guitars so you dont have anything to lose by trying. You'll like the results.What you're making now looks like they weigh 10 to 12 pounds when you could be making them at 5 pounds. Use a string through bridge and the sustain is fantastic. Quote Link to comment Share on other sites More sharing options...
Curtis P Posted February 28, 2005 Report Share Posted February 28, 2005 wow, you know nothing about guitars, do you?? in your opinion, what IS sustain?? Curtis Quote Link to comment Share on other sites More sharing options...
Daniel Sorbera Posted February 28, 2005 Report Share Posted February 28, 2005 lol check this out more badams junk hasent this guy been banned yet? read this Quote Link to comment Share on other sites More sharing options...
jnewman Posted February 28, 2005 Report Share Posted February 28, 2005 wow, you know nothing about guitars, do you?? in your opinion, what IS sustain?? Curtis ← Don't mind him... he's been telling everyone to cut big holes in all their guitars in every thread he's responded to - and saying the same thing about body mass and size hurting sustain. I'd just ignore him. Quote Link to comment Share on other sites More sharing options...
Meegs666 Posted February 28, 2005 Report Share Posted February 28, 2005 ok, lets just ignore it on this thread. we owe hyunsu that at least. hyunsu, ive been watching with awe and respect for the past few months. you are an amazing builder and with so much speed. im jealous, very jealous. Quote Link to comment Share on other sites More sharing options...
hyunsu Posted February 28, 2005 Author Report Share Posted February 28, 2005 (edited) thank to advice.. but i dont change my head stocks... until i find new design headstock. sorry to strange heastock.. strange LP Style guitar.. T_T but i like this style better than LP 59 Historic.. and better than LP 59 historic sound.. this guitar is my new guitar.. this body is my 2004 year's making body.. replace neck.. Edited February 28, 2005 by hyunsu Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted February 28, 2005 Report Share Posted February 28, 2005 Very nice yunsu, I like the flame on the spalt maple. Very nice. Hey I mugh be able to meet you in the summer. I'm suppose to go to Korea for one year in July, I think it will be to Humphrey or Youngsan. But I'm not sure which just yet. Quote Link to comment Share on other sites More sharing options...
hyunsu Posted March 2, 2005 Author Report Share Posted March 2, 2005 Good.. Maiden69 ^^ my home is near in Youngsan.. use Taxi. 20 min.. if you come in Korea, i want to meet you.. my yesterday work.. today i will assemble this guitar. and check sound ^^ i think.. i 'am really humberker pickup mania.. neck & body is Iroko(African Teak), zero fret's neck thick is 22.5mm.. my favorit zero fret's thick is 23~24mm some thin.. i want to brass saddle & Aluminum tail peace.. so i use tunomatic.. so i route brige hole.. but some strange.. next time i try new .. More Pic Quote Link to comment Share on other sites More sharing options...
S.Dodding Posted March 2, 2005 Report Share Posted March 2, 2005 Great, clean looking work Hyunsu, as always Love that spalted strat! Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted March 2, 2005 Report Share Posted March 2, 2005 I will send you an e-mail when I get there! On those tunomatic holes, next time you can do a template like I did here! Then when you place the TOM on the hole it will look like this , on this picture you can see the sleeves in the body, I could have taken them out, but I decided to leave them in. I use a file to take the edge on the side close to the wood, then hammer them in, tape over while painting. It looks smooth. Quote Link to comment Share on other sites More sharing options...
hyunsu Posted March 2, 2005 Author Report Share Posted March 2, 2005 thank to Maiden69... tite size hole is good.. but too big size hole(my guitar) is not good.. thank.. Maiden69.. next time i will try.. tite size hole.. Quote Link to comment Share on other sites More sharing options...
hyunsu Posted March 8, 2005 Author Report Share Posted March 8, 2005 AchTop body & My New Walnut LP PRS archTop is not mine.. it is my frineds work.. he's skill is amazing.. his job is sculpture. so it really amazing.. AchTop is Simple work for him.. Tele Project Pic i like this tele sound, it's sound is my best sound. Brige work is not good but.. i like this sound.. when i make guitar.. i like success of guitar making.. but .. recently i like guitar's sound's quality. Swamp Ash Body this body is swamp ash body.. neck is cort's HBS series neck.. 21 fret & neck heel is round.. i'am can't stop guitar making.. i'am lose my control.. T_T Quote Link to comment Share on other sites More sharing options...
mushy the shroom Posted March 10, 2005 Report Share Posted March 10, 2005 Hyunsu, you are incredible. A maxim for you: "A guitar a day keeps the doctor away!". Keep up the good (and fast) work! Quote Link to comment Share on other sites More sharing options...
CudBucket Posted March 11, 2005 Report Share Posted March 11, 2005 hyunsu, that's truly inspirational work. Congratulations. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.